/themes/plugins/fancybox/css/fancybox.css
Lastbiler Materiel til anlægsarbejder Varevogne Håndteringsmateriel Landbrugsmateriel
Auktion Udlejning Løsninger og Partnere DK Sprog
Hovedmenu
Hovedmenu
Løsninger og Partnere
Købe
Sælg
Nyttige links
Om Via Mobilis
Hej, identificer dig selv
Stats
 Tilbage til søgning
Jordstamper Maxus Maxus35-ton compactor
Jordstamper Maxus Maxus35-ton compactor

Affaldsstamper ny Maxus Maxus35-ton compactor Diesel

  • 2024
  • 0 Timer
  • 31-010 Kraków
Jordstamper Affaldsstamper
Væsentligste oplysninger
Sitereference : 10396519
Type Affaldsstamper
Mærke Maxus
Model Maxus35-ton compactor
Tilstand Ny
År 2024
Land POLEN
Fabrikant Maxus
Egenskaber Maxus Maxus35-ton compactor
Materiellets stand
Motor
Bemærkninger
Electronic diesel engine by CUMMINS.
Four separate hydrostatic drive systems are computer-controlled with feedback-free proportional electric control by DANFOSS.
Teeth designed for high durability. Each compactor wheel is equipped with two scraper bars and two wire cutters.
The hydraulic steering and blade lifting system is powered by a piston pump with a load-sensing system.
Sealed and comfortable driver’s cabin with dual side doors, air conditioning for heating and cooling.
Integrated Rollover Protective Structure (ROPS) with a sealed, arc-shaped tubular design.
Hydrostatic service brake, spring-applied hydraulically released (SAHR) parking and emergency brake system on all four wheels.
The reverse-mounted engine drives the hydraulic pumps via the gearbox, with protective walkways and ladders on both sides.
An infrared vehicle monitoring system and a backup buzzer provide convenience and enhanced driver safety with improved rear visibility.

Mass
Operating Mass (kg): 35,000
Axle Load (Front) (kg): 17,500
Axle Load (Rear) (kg): 17,500
Dimensions
Overall Length (mm): 8,250
Overall Width (mm): 4,000
Overall Height (mm): 3,750
Wheelbase (mm): 3,500
Ground Clearance (mm): 600
Compactor Wheels
Wheel Width (mm): 1,350 / 1,130
Wheel Diameter (Front/Rear) (mm): 1,620 / 1,620
Number of Teeth per Wheel (Front/Rear): 60 / 50
Engine
Diesel Engine Model: CUMMINS QSM11
Diesel Engine Power (kW): 250 (340 HP)
Rated Engine Speed (rpm): 2,100
Electrical System (V): 24
Drive
Number of Driven Wheels: 4
Driving Speed I (Forward/Reverse) (km/h): 0–4
Driving Speed II (Forward/Reverse) (km/h): 0–8
Bulldozer Blade
Blade Height (mm): 1,980
Blade Width (mm): 4,000
Blade Height Above Ground (mm): 1,200
Blade Depth Below Ground (mm): 200
Brakes
Travel Brake: Hydrostatic braking in neutral
Parking/Emergency Brake: Spring-applied, hydraulically released (SAHR)
Steering
Steering Method: Hydraulic central articulation with oscillation
Steering Angle (±°): 40
Oscillation Angle (±°): 15
Turning Radius (mm): 7,000
Capacities
Fuel Tank (L): 500
Hydraulic Oil (L): 300
Voir tout
Bemærkninger
Electronic diesel engine by CUMMINS.
Four separate hydrostatic drive systems are computer-controlled with feedback-free proportional electric control by DANFOSS.
Teeth designed for high durability. Each compactor wheel is equipped with two scraper bars and two wire cutters.
The hydraulic steering and blade lifting system is powered by a piston pump with a load-sensing system.
Sealed and comfortable driver’s cabin with dual side doors, air conditioning for heating and cooling.
Integrated Rollover Protective Structure (ROPS) with a sealed, arc-shaped tubular design.
Hydrostatic service brake, spring-applied hydraulically released (SAHR) parking and emergency brake system on all four wheels.
The reverse-mounted engine drives the hydraulic pumps via the gearbox, with protective walkways and ladders on both sides.
An infrared vehicle monitoring system and a backup buzzer provide convenience and enhanced driver safety with improved rear visibility.

Mass
Operating Mass (kg): 35,000
Axle Load (Front) (kg): 17,500
Axle Load (Rear) (kg): 17,500
Dimensions
Overall Length (mm): 8,250
Overall Width (mm): 4,000
Overall Height (mm): 3,750
Wheelbase (mm): 3,500
Ground Clearance (mm): 600
Compactor Wheels
Wheel Width (mm): 1,350 / 1,130
Wheel Diameter (Front/Rear) (mm): 1,620 / 1,620
Number of Teeth per Wheel (Front/Rear): 60 / 50
Engine
Diesel Engine Model: CUMMINS QSM11
Diesel Engine Power (kW): 250 (340 HP)
Rated Engine Speed (rpm): 2,100
Electrical System (V): 24
Drive
Number of Driven Wheels: 4
Driving Speed I (Forward/Reverse) (km/h): 0–4
Driving Speed II (Forward/Reverse) (km/h): 0–8
Bulldozer Blade
Blade Height (mm): 1,980
Blade Width (mm): 4,000
Blade Height Above Ground (mm): 1,200
Blade Depth Below Ground (mm): 200
Brakes
Travel Brake: Hydrostatic braking in neutral
Parking/Emergency Brake: Spring-applied, hydraulically released (SAHR)
Steering
Steering Method: Hydraulic central articulation with oscillation
Steering Angle (±°): 40
Oscillation Angle (±°): 15
Turning Radius (mm): 7,000
Capacities
Fuel Tank (L): 500
Hydraulic Oil (L): 300
Udsalgspris
2,553,158 DKK Ekskl. moms
Jordstamper Affaldsstamper
Væsentligste oplysninger
Sitereference : 10396519
Type Affaldsstamper
Mærke Maxus
Model Maxus35-ton compactor
Tilstand Ny
År 2024
Land POLEN
Fabrikant Maxus
Egenskaber Maxus Maxus35-ton compactor
Materiellets stand
Motor
Bemærkninger
Electronic diesel engine by CUMMINS.
Four separate hydrostatic drive systems are computer-controlled with feedback-free proportional electric control by DANFOSS.
Teeth designed for high durability. Each compactor wheel is equipped with two scraper bars and two wire cutters.
The hydraulic steering and blade lifting system is powered by a piston pump with a load-sensing system.
Sealed and comfortable driver’s cabin with dual side doors, air conditioning for heating and cooling.
Integrated Rollover Protective Structure (ROPS) with a sealed, arc-shaped tubular design.
Hydrostatic service brake, spring-applied hydraulically released (SAHR) parking and emergency brake system on all four wheels.
The reverse-mounted engine drives the hydraulic pumps via the gearbox, with protective walkways and ladders on both sides.
An infrared vehicle monitoring system and a backup buzzer provide convenience and enhanced driver safety with improved rear visibility.

Mass
Operating Mass (kg): 35,000
Axle Load (Front) (kg): 17,500
Axle Load (Rear) (kg): 17,500
Dimensions
Overall Length (mm): 8,250
Overall Width (mm): 4,000
Overall Height (mm): 3,750
Wheelbase (mm): 3,500
Ground Clearance (mm): 600
Compactor Wheels
Wheel Width (mm): 1,350 / 1,130
Wheel Diameter (Front/Rear) (mm): 1,620 / 1,620
Number of Teeth per Wheel (Front/Rear): 60 / 50
Engine
Diesel Engine Model: CUMMINS QSM11
Diesel Engine Power (kW): 250 (340 HP)
Rated Engine Speed (rpm): 2,100
Electrical System (V): 24
Drive
Number of Driven Wheels: 4
Driving Speed I (Forward/Reverse) (km/h): 0–4
Driving Speed II (Forward/Reverse) (km/h): 0–8
Bulldozer Blade
Blade Height (mm): 1,980
Blade Width (mm): 4,000
Blade Height Above Ground (mm): 1,200
Blade Depth Below Ground (mm): 200
Brakes
Travel Brake: Hydrostatic braking in neutral
Parking/Emergency Brake: Spring-applied, hydraulically released (SAHR)
Steering
Steering Method: Hydraulic central articulation with oscillation
Steering Angle (±°): 40
Oscillation Angle (±°): 15
Turning Radius (mm): 7,000
Capacities
Fuel Tank (L): 500
Hydraulic Oil (L): 300
Voir tout
Bemærkninger
Electronic diesel engine by CUMMINS.
Four separate hydrostatic drive systems are computer-controlled with feedback-free proportional electric control by DANFOSS.
Teeth designed for high durability. Each compactor wheel is equipped with two scraper bars and two wire cutters.
The hydraulic steering and blade lifting system is powered by a piston pump with a load-sensing system.
Sealed and comfortable driver’s cabin with dual side doors, air conditioning for heating and cooling.
Integrated Rollover Protective Structure (ROPS) with a sealed, arc-shaped tubular design.
Hydrostatic service brake, spring-applied hydraulically released (SAHR) parking and emergency brake system on all four wheels.
The reverse-mounted engine drives the hydraulic pumps via the gearbox, with protective walkways and ladders on both sides.
An infrared vehicle monitoring system and a backup buzzer provide convenience and enhanced driver safety with improved rear visibility.

Mass
Operating Mass (kg): 35,000
Axle Load (Front) (kg): 17,500
Axle Load (Rear) (kg): 17,500
Dimensions
Overall Length (mm): 8,250
Overall Width (mm): 4,000
Overall Height (mm): 3,750
Wheelbase (mm): 3,500
Ground Clearance (mm): 600
Compactor Wheels
Wheel Width (mm): 1,350 / 1,130
Wheel Diameter (Front/Rear) (mm): 1,620 / 1,620
Number of Teeth per Wheel (Front/Rear): 60 / 50
Engine
Diesel Engine Model: CUMMINS QSM11
Diesel Engine Power (kW): 250 (340 HP)
Rated Engine Speed (rpm): 2,100
Electrical System (V): 24
Drive
Number of Driven Wheels: 4
Driving Speed I (Forward/Reverse) (km/h): 0–4
Driving Speed II (Forward/Reverse) (km/h): 0–8
Bulldozer Blade
Blade Height (mm): 1,980
Blade Width (mm): 4,000
Blade Height Above Ground (mm): 1,200
Blade Depth Below Ground (mm): 200
Brakes
Travel Brake: Hydrostatic braking in neutral
Parking/Emergency Brake: Spring-applied, hydraulically released (SAHR)
Steering
Steering Method: Hydraulic central articulation with oscillation
Steering Angle (±°): 40
Oscillation Angle (±°): 15
Turning Radius (mm): 7,000
Capacities
Fuel Tank (L): 500
Hydraulic Oil (L): 300
Udsalgspris
2,553,158 DKK Ekskl. moms

tag-iconI 2 år på Via-Mobilis.dk

Hr. Maxus Machinery Limited Company
Allemand - Bulgare - Ukrainien - Roumain - Chinois - Turc - Français - Anglais
+48.666.21.52.08

Via Mobilis er forpligtet til at respektere de grundlæggende værdier i lovgivningen om beskyttelse af personoplysninger.

Dette site er beskyttet via reCAPTCHA. Googles fortrolighedspolitik og servicevilkår er gældende.

  Råd om sikkerhed  
Rapportér annonce
Lignende annoncer
12
Affaldsstamper Maxus ny
Affaldsstamper Maxus ny
Affaldsstamper Maxus ny

Affaldsstamper Maxus ny Maxus 35 tonnás Kompaktor

2,553,158 DKK Ekskl. moms
340 Salgsbetingelser 2024 35 tonnes Ny
Maxus 35 tonnás Kompaktor Motor: Elektronikus dízelmotor a CUMMINS-tól. Hajtási rendszer: Négy különálló hidrosztatikus hajtás, számítógép által...
15
Stamper med fåreben Bomag

Stamper med fåreben Bomag BMP 8500 Stage V/Tier 4f

170,963 DKK Ekskl. moms
2023
14
Blandet stamper Hamm

Blandet stamper Hamm HD 14 VT HD14iVT

Pris på forespørgsel
2023
4
Stamper LTMG ny

Stamper LTMG ny LTP80 80KG

8,212 DKK Ekskl. moms
2024 0.8 tonnes Ny Garanti for materiel
7
Stamper Ammann
Stamper Ammann
Stamper Ammann

Stamper Ammann Pilonneuse

6,346 DKK Ekskl. moms
2005
Pilonneuse AMMANN N° de série AVS68 Année 2005 Heures inconnues Poids 68 Kg Hauteur de la pilonneuse 93 cm Dimension de la plaque : -Longueur 35 cm...
Visning 1 gange 4

Øverst på siden