



Kasse over frysepunktet ny Renault Master 2.2 DCI Diesel
Haster- 17.22 M³
- Manuelt gear
- 3 siddepladser
- Gdańsk
- Garanti 24 måned
Væsentligste oplysninger
|
|
---|---|
Garanti for materiel
|
|
Sitereference : | 10699635 |
Karosseri | Kølevarevogn |
Undervogn | Kasse over frysepunktet |
Mærke | Renault |
Serie (mærke : Renault) | Master |
Model | 2.2 DCI |
Tilstand | Ny |
Dato for første indregistrering | -- |
Garanti for materiel | Ja |
Garantiens varighed | 24 måned |
Land | POLEN |
Fabrikant | Renault |
Egenskaber Renault Master |
|
---|---|
Hjulaksler | 4x2 |
Land (serie) | POLEN |
Kilometertal | 12 km |
Kørsel | Venstrestyret |
Euro standarder | Renault Euro 6 |
Kassens mål |
|
---|---|
Kassens højde | 2.0 meter |
Kassens indvendige bredde | 2.05 meter |
Kassens indvendige længde | 4.2 meter |
Mål |
|
---|---|
Volumen | 17.22 m³ |
Overflade | 8.61 m² |
Lasteevne |
|
---|---|
Samlede tilladte totalvægt | 3.5 Tons |
Udstyr Varevogn Renault |
|
---|---|
|
Materiellets stand |
|
---|---|
Energi | Diesel |
ATP-certificering |
---|
|
Supplerende oplysninger Renault 2.2 DCI |
|
---|---|
Gearkasse | Manuelt gear |
CO2-udledning | 347 g/km |
Antal siddepladser | 3 |
Type af kølegruppe | Elektrisk |
Motor |
|
---|---|
Effekt | 170 Salgsbetingelser |
Motorkraft | 125 kW |
Cylindervolumen | 1997 cm3 |
Udstyr i førerhus |
---|
|
Bemærkninger |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Voir tout
|
Bemærkninger |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Væsentligste oplysninger
|
|
---|---|
Garanti for materiel
|
|
Sitereference : | 10699635 |
Karosseri | Kølevarevogn |
Undervogn | Kasse over frysepunktet |
Mærke | Renault |
Serie (mærke : Renault) | Master |
Model | 2.2 DCI |
Tilstand | Ny |
Dato for første indregistrering | -- |
Garanti for materiel | Ja |
Garantiens varighed | 24 måned |
Land | POLEN |
Fabrikant | Renault |
Egenskaber Renault Master |
|
---|---|
Hjulaksler | 4x2 |
Land (serie) | POLEN |
Kilometertal | 12 km |
Kørsel | Venstrestyret |
Euro standarder | Renault Euro 6 |
Kassens mål |
|
---|---|
Kassens højde | 2.0 meter |
Kassens indvendige bredde | 2.05 meter |
Kassens indvendige længde | 4.2 meter |
Mål |
|
---|---|
Volumen | 17.22 m³ |
Overflade | 8.61 m² |
Lasteevne |
|
---|---|
Samlede tilladte totalvægt | 3.5 Tons |
Udstyr Varevogn Renault |
|
---|---|
|
Materiellets stand |
|
---|---|
Energi | Diesel |
ATP-certificering |
---|
|
Supplerende oplysninger Renault 2.2 DCI |
|
---|---|
Gearkasse | Manuelt gear |
CO2-udledning | 347 g/km |
Antal siddepladser | 3 |
Type af kølegruppe | Elektrisk |
Motor |
|
---|---|
Effekt | 170 Salgsbetingelser |
Motorkraft | 125 kW |
Cylindervolumen | 1997 cm3 |
Udstyr i førerhus |
---|
|
Bemærkninger |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Voir tout
|
Bemærkninger |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |

Isoterm Fiat Ducato Fiat 130 Multijet / dubel kabina 7 osobowy + kontener / A

Kølevarevogn Dacia Dokker

Kølevarevogn Opel MOVANO FURGON CHŁODNIA 0*C TEMPOMAT NAWIGACJA KLIMATYZACJA LEDY

Kasse under frysepunktet Iveco Daily 35C13
